Binding Services

Here we have listed our types of binding to help you understand our services a little better.

Wire-binding Services (also Spiral binding)

Wire binding is a popular binding method and is also commonly known as wiro binding, spiral binding and coil binding. Wire-bound documents are held together with a C shaped wire spine which binds the pages together securely, enabling them to turn 360 degrees and lay flat on the desk.

This is the most popular binding option for training manuals because the wire spine keeps the manual held together tightly and securely, and it’s great for longevity. If the manual needs to be written inside, a matt paper stock is recommended, although a silk paper stock will allow you to write with a biro.

Wire binding is cost-effective and usually, an acetate front cover and card back is added to your manuals to make them more durable.

This is the most cost-effective way of binding for small runs. A thin metal cob is run along the bound edge. Pages cannot be removed unless ripped out. Pages can also not be added very easily.  Wire-binding will lay flat on a desk and is very practical for Training and HR Manuals, Safety Manuals, School Record Books, Instruction Manuals, Workbooks, Presentations, Flip Books, Note Books and Jotters. Have a look at our wire-bound books here

• Durable• Doesn’t look as professional as a perfect-bound document
• Can lay flat on a desk• Pages cannot be added once the manual has been bound
• Easy to turn pages
• Printed tabs can be added easily before binding

Perfect Binding Services

Perfect binding is often used for softback books, also known as paperback books, and sports a flat spine. The pages are printed loose and then glued to the spine area. The cover and spine are fully customisable in terms of design. Our softback books are bound just like those in your local book shop.

Perfect binding makes your manuals look professional and are great for storing on bookshelves. They are usually kept as a resource after a course has finished, however, perfect-bound books only work well if the page count is higher as they tend to close on themselves. Because pages are glued into the spine, images or text near the middle of the manual can be harder to read and can sometimes get lost when the pages bow.

• Can be kept afterwards as a keepsake• Cannot lay flat on a desk
• Looks professional• Only works well with documents that have a higher page count
• Perfect-bound documents are not good for heavy usage
• Can be costly
• Printed tabs cannot be added

Ring binding

Ring binding is a simple form of document binding. The pages are printed, hole-punched (2 or 4 holes) and attached to 2 or 4 rings inside the binder. Your ring binder can be printed with a customisable front cover and spine and it is easy to update rin-bound documents. Simply open the metal rings and add or remove the hole-punched pages as needed.

Ring binding is a popular option for training manuals and course materials. A more cost-effective option would be to have a cover and spine printed as well for your ring binder. Ring binders lie flat, however, the pages can be tedious to turn as you have to thread the page through the ring and tearing is inevitable if care isn’t taken.

Pages can be added after the final document has been bound, and pages can also be taken out. This can be both an advantage and disadvantage as people can remove pages as they please and content could then be missing. If you want your delegates to use the training manual regularly afterwards and add more sections in future, then this is recommended. However, ring-bound manuals are also bulkier and aren’t easy to transport in a suitcase or small bag.

• sections, chapters or modules can be added easily after binding• Can be costly
• Ring binders can be re-used for other courses afterwards• Potential to be bulky and not easy to travel with
• Can lay flat on a desk
• Sturdy and durable
• Printed tabs can be added before or after binding

For more information on our company please pop over to our main website

Binding Services: Binding a document can be a bit confusing if you are not in the print trade or buy printed bound documents very often. The most popular books are printed in A4 size (210 x 297mm). There are a number of ways that your document can be bound. Depending on what you are using your document for, and how it is printed helps determine the right type of binding that you will need.


Fold And Stitched Books

A folded and stitched book is a handy style of binding, and it’s also a very popular one too. The book is folded down the middle and two stitches (or staples) are inserted. It is good for both A4 and A5 books. Books have to be run with a multiple of 4 pages and pages can only be ripped out, leaving less from for any vandalism. Folded and stitched bookbinding is most popular for Brochures, Sports Programs, Exam Papers, Marketing Collateral, Music Scores, School Prospectus, Newsletters, Employee Handbooks, Health and Safety Manuals and more.


Hard Back Binding

Hardback binding is a hard cardboard cover that is glued to the spine. This gives added protection for the book. The hardback option is especially popular for dissertation printing and thesis. It is also a way to present smarter books and showcase artwork. The books are printed and the cover is hand made and wrapped around the book. This is a popular binding service that we offer.

Again this binding has a spine.

To see all of our products click on our product range here.

If you would like to know more about who we are head over to our main website